Unicondylar Knee Prosthesis

The femoral component is symmetrical.
In the cementless version, the press-fit effect is made possible by a dual coating of plasma-sprayed titanium (80 µm) and HAP (80 µm).
It has a constant radius of curvature throughout the range of motion.
Up to 8° camber possible.
Femoral component is 6 mm thick
Primary stability ensured by two parallel pegs forming a 65° angle with the distal cut.
It is possible to choose between different types of baseplates and different types of fixation (cemented or cementless).
In the cementless version, the press-fit effect is made possible by a dual coating of plasma-sprayed titanium (80 µm) and HAP (80 µm).

The cementless version of tibial baseplate for fixed-bearing insert is asymmetrical (MEDR/LATL and MEDL/LATR).
Primary stability of the baseplate achieved through sagittal fin and anteriorly-positioned peg
Primary fixation can be improved by adding a fixation screw
Screw hole blocked with PEEK** stopper.

The tibial baseplate for fixed-bearing insert is symmetrical
Primary stability is achieved through sagittal fin and cement application
The baseplate's bearing surfaces are highly polished*.
Insert locked using double snap-in mechanism
Insert made of UHMWPE

Full-PE tibial implant:
The full-PE tibial implant is symmetrical.
Flat bearing surface.
Underside of implant has 5 hollowed-out areas for cement, which ensures primary stability along with sagittal fin.