Neonatal Transport İncubator

Tende VAV-TR can be operated by AC network, external DC power supply or by an internal battery. The battery starts to charge when the AC source is connected. The transport incubator can be operated for minimum of two hours with a single battery and minimum of four hours with double batteries.

Mattress

Biocompatible, Cytotoxicity and Skin Irritation Free, Fire Retarded, Water Proof & Washable

Humidification System

A passive humidification system was preferred in Tende VAV-TR transport incubator. Tende Recommends disposable sponge because of contamination risk. 50-60% Humidity ratio can be maintained for approximately 8 hours in a system where only 250 ml water is used.

Temperature Mode

Clinicians can easily set air or skin mode temperature and monitor both values in the LED display simultaneously.

Control Panel

The microprocessor-controlled Tende VAV-TR ergonomic control panel allows users to control the incubator by membrane keys. A wide digital LED display that can be monitored easily from all angles shows data such as air and skin temperature, oxygen percentage, SpO2 (oxygen saturation), BPM (Pulse value), power supply indicator, battery status, and other data simultaneously and individually.

Oxygen System

Safety and security are very important in Tende VAV-TR oxygen system so the oxygen level can be monitored with a 1% resolution. Oxygen values are shown at the control panel continuously.

Examination Lamp

There is a LED examination lamp on the incubator which can illuminate the entire surface over the cabinet for facilitating interventions to be done to the baby inside.